SCULPFUN S70 MAX 70W Laser Engraver

70W Laser for Fast Cutting and Engraving of Large Workpieces

SCULPFUN S70 MAX 70W — a laser engraver with an optical power of 70W and a working area of 830 x 800 mm. The equipment supports cutting thick materials in one pass, high-precision engraving, and processing large workpieces. Thanks to its rigid construction and linear guide, it ensures positioning accuracy up to 0.01 mm. The automatic Air Assist system improves cutting quality, removes smoke from the processing area, and reduces soot formation. Compatible with LightBurn and LaserGRBL software, it supports working with wood, acrylic, leather, and other materials.

Main Advantages of SCULPFUN S70 MAX 70W

• Cutting thick materials in one pass. The 70W laser unit combines fourteen 6W diodes and effectively removes combustion products thanks to 50 l/min air blow. According to the manufacturer, the model can cut acrylic up to 35 mm thick and wood up to 40 mm in one pass without forming soot.
• Stable accuracy at high speed. The design with a three-roller system and high frame rigidity ensures smooth operation and quality engraving even at maximum speed up to 36,000 mm/min.
• Clean cut edges without excess soot. The automatic Air Assist system is controlled via the controller board and software. Air supply helps remove smoke from the processing area and improves cutting quality.
• Quick focus distance adjustment. A flip-down bar allows you to set the desired laser height in seconds. This reduces preparation time before starting work.
• Multi-level protection. The device is equipped with limit switches, a flame sensor, a buzzer, and an emergency stop button to prevent equipment damage.

Application Categories of SCULPFUN S70 MAX

The design features and power source allow the laser device to be used in the following areas:

• High-speed cutting of wood and MDF. Direct production of furniture components, constructors, packaging, and souvenir boxes.
• Advertising production. Cutting of volumetric letters, logos, and signs from UV-resistant colored and transparent acrylic.
• Textile and leather industry. Precise cutting of natural leather, suede, and dense fabrics for clothing, footwear, and accessories.
• Serial marking. Applying detailed serial numbers, barcodes, and artistic images on stainless steel, ceramics, and stone.

How to Start Working with SCULPFUN S70 MAX 70W

Starting work with the SCULPFUN S70 MAX 70W laser engraver does not require complex setup and takes minimal time. To properly prepare the equipment for operation, follow the steps below.

1. Assemble the machine frame. Assemble the frame according to the user manual. Ensure all elements are securely fixed and guides are installed without misalignment.
2. Install the laser module. Secure the laser module on the X-axis carriage and connect all necessary power and control cables.
3. Connect the Air Assist system. Connect the air compressor to the laser module and check the functionality of the air blow system.
4. Connect the power supply. Connect the main power adapter and network cable to the power grid. If necessary, connect the TS1 control touchscreen.
5. Connect the machine to the computer. Use a USB cable or Wi-Fi connection to communicate with the computer. Install and launch LightBurn or LaserGRBL software.
6. Perform laser focusing. Use the autofocus system or flip-down focusing bar to set the correct distance between the laser and the material surface.
7. Prepare the workpiece. Place the material within the 830 x 800 mm working area and secure it to prevent shifting during operation.
8. Run a test engraving. Before the main work, it is recommended to perform a test on a small area of the material to select the optimal laser speed and power.
9. Check safety systems. Ensure the limit switches, flame sensor, emergency stop button, and Air Assist system are working. Be sure to wear protective glasses before starting.
10. Start working. Load the finished layout into the control software, position the workpiece, and start the cutting or engraving process.

To speed up the equipment preparation process and avoid possible errors during assembly, we recommend watching the video on assembling and first launching the SCULPFUN S70 MAX 70W.

SCULPFUN S70 MAX Package Contents

The supply package includes all necessary components for quick assembly of the coordinate table and connection of peripheral devices. Along with the frame parts, cooling system components and user protective accessories are supplied.

• SCULPFUN S70 MAX laser module (70W).
• Air Pump for air blow.
• Optical laser module.
• TS1 control touchscreen with memory card and adapter.
• Main power adapter.
• Closed-type protective glasses.
• Tool kit for optical lens maintenance.
• User manual for assembly and setup.
• Assembly kit with keys and adjustment elements.
• Power cable for control screen.
• Set of mounting screws for the first assembly stage.
• Power network cord.
• Set of mounting screws for the second assembly stage.
• Data transmission interface cable.
• Machine frame (5 parts).

Technical Specifications

Tips Before Starting Work

• Before first powering on, check the parallelism of the frame guides and belt tension to eliminate geometric errors during testing.
• Always activate the Air Assist automatic air blow during wood or plastic cutting to protect the protective glass from soot deposition.
• Use a metal backing under the workpiece to protect the table surface from through burning by a powerful beam.
• Regularly inspect and clean the optical lens with isopropyl alcohol after prolonged cutting of materials with high resin content.
• Create a test matrix of speeds and powers for each new type of material to optimize time expenditure.

Looking for equipment capable of handling thick acrylic and wood at high speeds? The SCULPFUN S70 MAX 70W laser machine will provide industrial productivity for your business with a working field of 830 x 800 mm and a power of 70W.