Creality Fume Extractor

Air Purifier for Laser Engraving

Creality Fume Extractor is a compact air purification system designed to absorb smoke, fine dust, and unpleasant odors during laser processing, with a filtration efficiency of 99.97%, a 100W brushless motor, and a noise level of less than 50 dB.

Advantages of Creality Fume Extractor

• Multi-layer filtration system. The design combines several consecutive barriers to absorb pollutants of different fractions. The extractor captures both large soot particles and microscopic dust along with burning odors.
• High particle retention rate. The claimed air purification level reaches 99.97%. This prevents the spread of harmful combustion products indoors.
• 100W brushless motor. The device is designed to maintain a stable suction flow during prolonged operation. The energy-efficient technology creates sufficient draft to remove vapors.
• Low noise level. The working sound pressure parameter is less than 50 dB. The device does not create acoustic discomfort during prolonged use in an enclosed space.
• Flexible 360° air duct. The corrugated tube can fix the set bend and rotate in any direction. The user can direct the intake nozzle directly to the smoke emission area.
• Ease of maintenance. Replacing filter cartridges is done without the use of special tools. Access to the internal compartment allows for quick updating of consumables.

Design and Filtration System

The purifier consists of a durable housing, an exhaust unit with adjustable suction power, and a swivel hose. The airflow passes through a three-level barrier system. Initially, the primary membrane stops large soot and dust particles. At the next stage, the HEPA filter removes microscopic suspensions from 0.3 microns, after which the carbon layer adsorbs chemical compounds and odors.

The flexible tube is fixed at the desired angle without additional supports. This allows the intake nozzle to be installed near the laser engraver's working area.

Thanks to the soundproof design of the housing and the brushless motor, the extraction station operates with a noise level below 50 dB, which corresponds to the volume of a quiet conversation.

Where Creality Fume Extractor is Used

The device is designed for ventilation and air purification in enclosed spaces during:

• laser cutting and engraving of natural wood, plywood, or MDF;
• laser processing of natural or artificial leather;
• cutting and marking of fabric, felt, and paper;
• engraving and cutting of laser-processable acrylic and polymers;
• removal of fine dust and soot from the working area of the laser machine.

Compatibility

The device is suitable for Creality Falcon series laser engravers, protective enclosures for laser machines, and equipment from other manufacturers. The flexible air duct is placed directly near the smoke source or connected to the exhaust nozzle of closed chambers.

What's Included

The set comes fully ready for assembly and first start-up.

1. Creality Fume Extractor air purifier.
2. Flexible air duct with nozzle.
3. Set of installation filters (primary, HEPA, carbon).
4. Power cable.
5. User manual.

Technical Specifications of Creality Fume Extractor

Tips for Selection and Operation

• Place the purifier on a stable flat surface near the workbench.
• Bend and direct the intake tube as close as possible to the vapor formation area for maximum smoke capture.
• Do not block the exhaust vents on the device housing.
• Periodically inspect the filters and replace them if suction power decreases or residual odors appear.
• Follow the manufacturer's recommendations regarding the operating conditions of the device indoors.

Creality Fume Extractor System

Ensure safety and comfort in your workshop! The Creality Fume Extractor system effectively cleans the air from smoke and unpleasant odors when working with laser engravers. Check the technical parameters and compatibility with your equipment, and if you have any doubts about the choice, our specialists will provide professional consultation.