SCULPFUN S30 Pro Max 20W Laser Engraver

Laser Engraving and Cutting on SCULPFUN S30 Pro Max

SCULPFUN S30 Pro Max 20W is a 20W diode laser engraver designed for cutting thick materials. The compressed beam with a spot size of 0.08 x 0.10 mm ensures high clarity of drawings. The working area of 410 x 400 mm allows processing large workpieces in small-scale production conditions. The machine is designed for workshops, advertising, souvenir creation, and decorative elements.

Key Technical Advantages

• Automatic Air Assist System. This function improves cutting quality and reduces smoke in the processing area. The complete high-pressure nozzle directs a powerful stream that instantly removes combustion from the laser-material contact point.
• Precise Laser Spot. Allows forming thin lines and small graphic elements. The focused spot size is approximately 0.08 × 0.10 mm. This is important for texts, logos, and complex contours.
• Reinforced Frame Construction. Contributes to the precise movement of the laser module across the entire table area. Metal construction elements reduce vibrations during operation. This positively affects engraving quality.
• Convenient Focus Adjustment. Simplifies equipment preparation for work. A special focusing element is used to set the correct distance. This allows quickly preparing the laser for new material.

20W Laser Module in SCULPFUN S30 Pro Max

The SCULPFUN S30 Pro Max engraver is equipped with a module featuring beam compression technology, combining four laser elements into a single stream with a wavelength of 455 nm. The design concentrates energy at a minimal point of 0.08 x 0.10 mm, allowing for a thin cut line and clear detail boundaries.

The high radiation density ensures penetration through wood up to 15 mm thick or birch plywood up to 10 mm in one pass. When working with raster or vector graphics, the system consistently reproduces small inscriptions, logos, and complex artistic elements without contour deformation.

Engraving Precision and Cutting Quality

The design with a linear guide along the X-axis ensures uniform module movement and consistent processing quality across the entire area. Thanks to the minimal laser spot size, the machine creates a narrow cut line with neat contours and flawlessly details small texts or logos on leather, acrylic, and plywood. Additionally, the built-in Air Assist system effectively blows away soot, leaving material edges clean and eliminating the need for final polishing.

The working area of 410 x 400 mm allows cutting large-format workpieces—from wall decor to information signs—without prior division into parts. This space enables simultaneous layout of batches of small parts on the table, significantly optimizing material costs, reducing the number of starts, and increasing overall workshop productivity for both individual orders and serial production.

Material Compatibility Parameters

SCULPFUN S30 Pro Max 20W supports working with materials commonly used for advertising and souvenir production.

• Engraving Materials: wood, plywood, MDF, leather, bamboo, paper, cardboard, plastic, ceramics, stainless steel, oxidized metal, painted metal, stone.
• Cutting Materials: plywood, wood, MDF, acrylic, leather, paper, cardboard, bamboo.

First Start and Setup of SCULPFUN S30 Pro Max

Preparing the equipment for the first start takes minimal time and is performed according to the manufacturer's instructions.

1. Assemble the metal frame of the S30 Pro Max engraver according to the manufacturer's instructions.
2. Install the 20W laser module.
3. Connect the cables and power supply.
4. Connect the equipment to the computer via a USB cable.
5. Install and configure LightBurn or LaserGRBL software.
6. Adjust the laser focus.
7. Activate the Air Assist function in the software for test cutting.
8. Conduct a test material processing and perform the first work project.

After selecting the optimal speed and power parameters, results can be saved in the software's material library for future use.

SCULPFUN S30 Pro Max 20W Package Contents

The supply package includes all necessary components for quick machine assembly.

• S30 Pro MAX 20W Laser Module. Powerful four-diode emitter with built-in protective glass.
• Laser Repair Kit. Branded Laser Repair Kit for protective optics maintenance.
• 12V Automatic Air Pump. High-pressure compressor for stable Air Assist system operation.
• A4 Wooden Plates (3 pcs). Wooden boards 3 mm thick for test cutting and engraving.
• Limit Switches (2 pcs). Travel limit sensors for safe module positioning.
• 12V 5A Power Adapter. Block for stable equipment connection to the power grid.
• Power Cable. Network cord for voltage supply.
• USB Cable. Interface wire for connecting the engraver to a computer.
• Air Tube. Flexible hose for air supply from the compressor to the nozzle.
• Installation Tool Kit. Set of mounting keys and screws for frame assembly.
• Protective Glasses. Special optical accessory for operator eye safety.
• A4 Metal Base. Steel protective plate to protect the work table from burning.
• User Manual. Detailed guide with step-by-step assembly algorithm steps 1–6.
• X-axis Unit. Pre-assembled linear guide for quick installation.
• X-axis Profiles (2 pcs). Metal structural profiles.
• Y-axis Profiles (2 pcs). Guiding metal profiles.
• Control Unit. Main module with built-in motherboard.
• Support Legs (3 pcs). Support elements for frame fixation and leveling on the surface.

Technical Specifications

Need a laser engraver for a workshop with a powerful laser module? SCULPFUN S30 Pro Max allows performing a wide range of engraving and cutting tasks.