- Stock: In Stock
- Product code: 00-00014873
This offer ends in:
Creality Space Pi Plus Filament Dryer
Creality Space Pi Filament Dryer Plus is designed to remove moisture from plastic filaments before or during printing. The model is equipped with a 300W ceramic PTC heater and a convection fan for even circulation of hot air inside the chamber. The device's volume is calculated to accommodate two spools weighing 1 kg each. The operating temperature range is from 45°C to 70°C, allowing for the drying of both basic plastics like PLA, PETG, ABS, and hygroscopic ones like PA, PC, TPU.
Specifications and Features of Space Pi Plus
- Dual Chamber and PTC Heating: A 300W heating element and cooler provide constant airflow, removing moisture from two spools simultaneously without deforming the plastic bobbins.
- 3.7-inch Touch Display: Displays current temperature and humidity readings in real-time and serves for setting selection.
- Presets for 12 Types of Plastic: The dryer’s memory includes profiles with defined time and temperature for 12 types of materials, including PLA, ABS, PETG, TPU, PA, PC.
- Drying Timer up to 48 Hours: The operating time is adjustable from 0 to 48 hours depending on the type of filament and its moisture level.
- Settings Memory: In case of a power outage, the device retains the current state and continues drying after power is restored.
- Filament Feeding During Printing: A sealed body with multiple PTFE tube outlets allows the dried filament to be fed directly into the extruder or automatic filament change system.
Compatibility
The device is used for pre-drying and for feeding the filament directly during the printing process.
- Types of Plastic: PLA, PETG, ABS, TPU, ASA, PVA, Nylon (PA), PC, PET, as well as composites with carbon fiber or fiberglass.
- Filament Diameter: 1.75 mm and 2.85 mm.
- Capacity Parameters: 2 spools weighing up to 1 kg (outer diameter — up to 200 mm, width — up to 75 mm).
- Compatible Printers: All types of FDM 3D printers, including models with multiple extruders or multi-material blocks.
Package Contents
- Creality Space Pi Dryer Plus — 1 pc.
- Power cable — 1 pc.
- PTFE tubes — 2 pcs.
- User manual — 1 pc.
Technical Specifications
| Parameter | Value |
| Purpose | Moisture removal, storage, and filament feeding during printing |
| Capacity | 2 spools weighing up to 1 kg each |
| Permissible Spool Sizes | Diameter: up to 200 mm, Width: up to 75 mm |
| Power | 300 W |
| Heater Type | Ceramic PTC |
| Temperature Mode | 45–70 °C |
| Display | Touch, 3.7" |
| Timer | 0–48 hours |
| Monitoring | Real-time humidity and temperature display |
| Filament Diameter | 1.75 mm / 2.85 mm |
| Network Parameters | 220 V, 50/60 Hz |
| Dimensions (L × W × H) | 315 × 300 × 225 mm |
| Weight (Net / Gross) | 1.9 kg / 2.4 kg |
Ordering Creality Space Pi Filament Dryer Plus
You can order the Creality Space Pi Plus dryer with a manufacturer’s warranty in our online store. For consultation on choosing drying modes, please contact our technical department.
