AgiBot C2 Cleaning Robot

Compact Robot for Daily Floor Cleaning

AgiBot C2 is an autonomous cleaning robot for small indoor areas with an approximate size of 500 to 1,000 m². It performs sweeping, vacuum cleaning, and wet mopping, automatically selecting the mode according to the type of flooring. The body height of 39 cm allows it to work under tables, shelves, and other furniture if there is enough free space. The station automates charging, water operations, emptying the waste container, and drying the mop.

Main Advantages of AgiBot C2

• Three cleaning methods. C2 performs sweeping, vacuuming, and wet mopping. The mode can automatically change depending on the type of flooring.
• Compact design. The body height is 39 cm, allowing the equipment to move under tables, shelves, and other furniture if there is enough space.
• Edge cleaning. The cleaning width is 390 mm, and the distance from the edge during passage is no more than 50 mm.
• Automatic cleaning mode selection. C2 recognizes the type of debris and level of contamination and adjusts the working mode accordingly.
• Interaction with building infrastructure. It is designed to work with elevators, automatic doors, and access control systems for moving between zones without constant staff involvement.
• Automated maintenance. The station performs charging, filling and draining water, emptying the waste container, and drying the mop.

Three Cleaning Modes of AgiBot C2

C2 combines sweeping, vacuum cleaning, and wet mopping. Switching between them occurs automatically according to the type of surface, so the cleaning method can change during a single route. The working width is 390 mm. During movement, the equipment can clean the surface at a distance of ≤50 mm from the edge, reducing the number of areas that require additional manual processing. The dry waste container has a capacity of 1.3 L. There is a separate clean water tank with a capacity of 4 L and a dirty water tank of 3.5 L.

Compact Body for Cleaning in Narrow Areas

The height of C2 is about 39 cm. The low-profile design is intended for areas that are difficult to reach with standard floor cleaning equipment. The robot can move under tables, shelves, and other furniture if the height of the free space matches its dimensions. This design is particularly suitable for stores, offices, and other spaces with a large number of furniture and commercial equipment.

Autonomous Operation and Route Management

C2 can independently perform assigned tasks and change the cleaning method depending on the surface and nature of the contamination. During operation, the equipment determines the type of debris and level of contamination, then adjusts the cleaning strategy. For work in multi-zone buildings, interaction with elevators, automatic doors, and access control systems is provided.

AgiBot C2 Station

The station automates operations that usually require staff involvement between cycles. C2 can independently return to it for charging, filling with clean water, and draining dirty water. The station also automatically empties the robot's container and dries the mop after use. The station container capacity is 10 L.

Where AgiBot C2 Can Be Used

The model is aimed at small and medium-sized indoor areas where regular automated floor cleaning is needed. The intended application scenarios include:

• Office buildings. Cleaning corridors, open work areas, and other indoor spaces.
• Serviced apartments and aparthotels. Cleaning common areas, corridors, and spaces between living quarters.
• Retail stores. Regular cleaning of shopping halls, aisles, and areas near shelves.
• Supermarkets. Cleaning aisles and other accessible areas of the shopping hall.
• Exhibition halls. Cleaning open exhibition areas and aisles between stands.
• Office lobbies. Regular cleaning of entrance areas and spaces with constant foot traffic.

Compatible Floor Types

AgiBot C2 can work with several common types of flooring:

• Carpeted floors. For such surfaces, sweeping and vacuum cleaning modes are used without wet mopping.
• Marble. Suitable for regular cleaning of smooth hard floors in public and commercial spaces.
• PVC flooring. The robot can clean polymer floors in offices, stores, and other indoor areas.
• Ceramic tiles. Cleaning of tiled surfaces in commercial and public spaces is supported.

The specific cleaning method depends on the type of surface. Therefore, sweeping, vacuum cleaning, and mopping are not necessarily applied equally to each type of flooring.

Performance and Autonomy of AgiBot C2

The cleaning performance is 300–700 m²/h depending on the working conditions and selected mode. The duration of wet cleaning reaches 4 hours, and full charging takes about 2 hours. The movement speed is 0.4–0.6 m/s. The equipment is designed to overcome slopes up to 10°, which should be considered when planning the route between different areas of the premises.

Technical Specifications of AgiBot C2

Operating Tips for AgiBot C2

• Ensure free access to the station. There should be no objects on the approach route that hinder the automatic return of C2.
• Monitor the condition of the tanks. Periodically check the clean and dirty water tanks, especially before long working cycles.
• Clean the working elements. Remove hair, fibers, and other debris from elements that come into contact with the floor.
• Check the waste container. Despite automatic emptying at the station, the condition of the container should be monitored during regular maintenance.
• Consider the height of furniture. Before starting the route under tables and shelves, check if there is enough free space for the 39 cm high body.
• Select the mode according to the flooring. Before operating on a new surface, ensure that the selected cleaning method matches its type.

Order AgiBot C2 Cleaning Robot

Order AgiBot C2 to automate floor cleaning in office, retail, and other commercial premises. Our specialists will consult on the configuration, capabilities of the equipment, and its implementation at your site.