Falcon AP1 Mini High-Efficiency HEPA Composite Filter

Replaceable HEPA Filter Falcon AP1 Mini

Filter Falcon AP1 Mini is a consumable cleaning element designed to capture combustion products during laser processing of materials. The model is designed for installation in the internal compartment of the Creality Falcon AP1 Mini air purifier. The filter unit traps fine dust, solid particles, and gaseous impurities, restoring the declared efficiency of the exhaust system. The component is intended for scheduled replacement after the wear of the standard cartridge.

Main Advantages of the Replaceable Filter Falcon AP1 Mini

• Composite structure. The filter combines several layers for sequential retention of contaminants of different fractional compositions. This allows simultaneous capture of large particles, fine dust, and harmful gases.
• Effective filtration of partial contaminants. The ability of the HEPA layer to retain up to 99.97% of microparticles sized from 0.3 microns. This level of retention reduces the entry of fine smoke into the room.
• Absorption of gases and unpleasant odors. A layer containing activated carbon adsorbs volatile substances released during the heating of plywood, acrylic, or leather.
• Quick installation. The cartridge design precisely matches the mounting location of the AP1 Mini purifier. This allows replacement without additional tools or special skills.

Construction and Filtration Principle

According to the manufacturer, the replaceable element Falcon AP1 Mini has a multi-layer composite structure. Each layer is designed to perform a specific stage of air flow purification passing through the purifier:

1. Primary filter: located at the air flow inlet and retains large dust particles, chips, or soot, protecting subsequent layers from rapid clogging.
2. High-efficiency HEPA layer: designed to capture fine suspended smoke particles sized from 0.3 microns.
3. Activated carbon layer: uses sorption properties to bind gases and neutralize burning odors.

Timely replacement of the contaminated block restores the calculated suction power of the purifier and reduces the load on the device's fan.

Compatibility with Creality Falcon AP1 Mini

The filter is designed for the Creality Falcon AP1 Mini air purifier. Before purchasing, it is recommended to check the labeling on the body of your smoke purifier to ensure that the device belongs to the AP1 Mini series. Compatibility with other filtration systems is not specified by the manufacturer.

When Filter Replacement is Needed

Scheduled replacement of the filter cartridge is recommended under the following conditions or signs:

• resource depletion according to the filter status indicator on the AP1 Mini purifier panel;
• noticeable reduction in air flow power at the exhaust system outlet;
• appearance of a persistent smoke odor during laser engraver operation;
• visual contamination of the primary filter surface with a dense layer of soot.

Technical Specifications of the Replaceable Filter Falcon AP1 Mini

Replacement and Operation Tips

• Before starting the replacement, be sure to turn off the Falcon AP1 Mini air purifier and disconnect the power cable from the mains.
• Remove the new part from the protective polyethylene packaging immediately before installing it in the housing.
• Install the cartridge according to the air flow direction arrows on the filter or device housing.
• Do not attempt to wash the HEPA layer or activated carbon with water — this leads to the destruction of the material structure and loss of filtering properties.

Buy Replaceable Filter Creality Falcon AP1 Mini in Ukraine

You can order a replaceable filter for the Creality Falcon AP1 Mini at an affordable price in our online store with fast delivery across Ukraine. Our managers will confirm the availability of the product and provide consultation on shipping conditions to Kyiv, Kharkiv, Odesa, Dnipro, or other cities.