xTool Fire Safety Set v1.5

Description

Fire Safety Set for Laser Engraver

Fire Safety Set for Laser Engraver xTool Fire Safety Set v1.5 for fire detection and extinguishing.

Attention! The set is only suitable for the standards of the European Union

Laser engravers may pose a fire hazard. This problem exists all over the world, since laser burning is carried out at fairly high temperatures. The processed material may ignite and cause a fire in production.

If the laser engraver is operated in compliance with fire safety standards and regulations, the likelihood of a fire is reduced. However, the risk of material ignition still exists. Modern fire extinguishers are quite toxic and can damage expensive equipment. We present a new development that is safe for people and machines: xTool Fire Safety Set v1.5 European Standard

Innovation from the leader of the laser industry

xTool is one of the world’s leading companies in the production of laser engravers. A responsible manufacturer is fully aware of the responsibility for the safety of its equipment. Through the efforts of leading engineers, a Complete Fire Safety Kit for a desktop laser was developed and implemented into production.

What is included in the xTool Laser Engraver Fire Kit?

For fire detection, alarm and fire extinguishing, the kit includes:

1. Detection and alarm

• Control unit.
• Sensor hub.
• Sensors.

2. Fire extinguishing and power cut

• Control unit.
• Gas cylinder*.
• Air tube.
• Smart switch.

Flame detection is automatic

The xTool Fire Safety Set has a high sensitivity to fire hazards. This is achieved by using 5 fire detection sensors, integrated algorithms for light, temperature and conditions inside the closed laser.
The alarm is triggered automatically immediately after a fire is detected. The user is warned of a fire by continuous “beeping” sounds.

How does the xTool Fire Safety Set work?

Once the warning sound is activated, there are several options.

1. You stop the alarm by pressing a special button on it and extinguish the fire yourself.
2. If this does not happen, the system automatically turns off the power supply, stops the laser engraver, and prevents further spread of the fire itself using the xTool Fire Safety Set intelligent switch.
3. The set will then automatically release CO2 gas into the closed laser and the fire will go out. The vapors of the substance are non-toxic and odorless.

The kit is applicable to all lasers in closed workspaces <0.13 m3.

It is necessary to use a cover to close the workspace.

It is also necessary to introduce an air tube into the closed space.

If the permissible values ​​for volume and laser closure are observed, the xTool Fire Safety kit will quickly cope with a fire.

With the fire safety kit from the leading manufacturer of laser machines xTool, you will ensure fire safety and ecology of production. Engrave safely with xTool!

* This product must be used in a closed space. For example, the xTool D1 series must be used with the xTool housing.