- Stock: In Stock
- Product code: 00-00015576
Raise3D T700 Industrial 3D Printer
Raise3D T700 is a large-format industrial FFF 3D printer for producing bulky parts, functional prototypes and production tooling. The build volume is 700 × 500 × 1000 mm, which allows items up to one metre tall to be printed. The TwinFlow extrusion system supports operation with two filaments through a single nozzle. The maximum print speed reaches 600 mm/s, the extruder temperature is 420 °C, and active chamber heating up to 60 °C helps maintain stable temperature conditions when working with engineering polymers.
Key Features of the Raise3D T700
- Printing of large-format parts.The 700 × 500 × 1000 mm build volume makes it possible to produce tall housing parts, prototypes and production tooling in a single print cycle.
- Flexible extrusion mode configuration.The TwinFlow system has two filament feed channels and one shared nozzle. It supports single-extruder and dual-extruder modes, as well as the high-throughput Dual Extrusion High Flow mode.
- High part production speed.The print speed reaches 600 mm/s, the printhead acceleration is 30,000 mm/s², and the maximum travel speed is 1500 mm/s.
- Productive material extrusion. The TwinFlow system delivers a volumetric melt flow of up to 80 mm³/s, depending on the temperature, filament type and nozzle parameters.
- Ability to print with engineering and reinforced filaments.The nozzle heats up to 420 °C and has a wear-resistant silicon carbide (SiC) tip, which allows work with various categories of materials.
- Stable temperature conditions during printing.Active chamber heating up to 60 °C helps reduce temperature fluctuations and the risk of part warping.
- Reliable part retention on the platform.The platform heats up to 120 °C, has a double-sided PEI coating and supports Mesh Leveling for automatic compensation of surface irregularities.
TwinFlow Extrusion System with Two Feed Channels
TwinFlow technology uses two independent filament feed channels that converge in a single nozzle via a Y-shaped manifold. The design allows work with two material streams without mechanical switching between separate nozzles. The system supports three modes:
- Single Extrusion. Printing with one filament through one feed channel.
- Dual Extrusion. Using two channels for printing with compatible materials, in particular a main material and a support material.
- Dual Extrusion High Flow. A mode with increased volumetric melt feed for suitable materials and print parameters.
The maximum volumetric flow of TwinFlow is 80 mm³/s. Actual performance depends on the temperature, polymer type, nozzle diameter and extrusion settings. A 0.6 mm nozzle is used as standard. A 0.4 mm option is also available. The nozzle body is made of CuCrZr alloy with high thermal conductivity, and the SiC silicon carbide tip has increased resistance to abrasive wear.
High-Speed 3D Printing and Motion System
The Raise3D T700 supports a maximum print speed of 600 mm/s. The printhead travel speed without extrusion can reach 1500 mm/s, and the acceleration can reach 30,000 mm/s².
The high motion parameters are used to shorten the duration of individual print operations. Working speed values should be selected according to the model geometry, filament characteristics, layer height and permissible volumetric flow.
For a 0.6 mm nozzle, the stated layer height is 0.3 mm. The print accuracy corresponds to class IT11 based on test results with Raise3D Premium PLA filament.
Chamber and Platform Temperature Control
The 3D printer is equipped with an active heating system for the build chamber up to 60 °C. Maintaining the temperature around the model helps control polymer cooling and reduce the risk of deformation caused by temperature fluctuations. The heated platform operates at temperatures up to 120 °C. A silicone heating element is used for heating. The working surface is fitted with a flexible double-sided plate with a PEI coating. After printing is complete, the plate can be removed to separate the finished part.
The Mesh Leveling system with flatness detection helps compensate for deviations in the platform surface. The design also includes an electric top cover and an auxiliary heat-dissipation module. A HEPA filter with an activated carbon layer is installed for air purification.
Compatible 3D Printing Materials
The Raise3D T700 supports 1.75 mm filaments from three Raise3D series: Hyper Speed (PLA, PLA Pro, ABS, PETG CF, PET CF), Industrial (PPA CF, PET Support, PPS CF) and Premium (PLA, ABS, ASA, PETG, TPU-95A).
Support for PPA GF, PET CF, PET GF, PETG ESD, PPA Support and PVA+ has also been announced. Compatibility depends on the material type, nozzle configuration, temperature parameters and the profile in ideaMaker.
3D Print Monitoring and Automatic Error Detection
The Raise3D T700 is equipped with cameras for observing the build area and the extrusion process. The main camera, with a resolution of 1920 × 1080 pixels, makes it possible to monitor the model production process. The additional nozzle camera has a resolution of 2592 × 1944 pixels. The monitoring system includes:
- Filament Run-out Detection. Detection of filament running out.
- Power-loss Recovery. The ability to resume printing after a power interruption.
- Flow Rate Detection. Monitoring of material feed parameters.
- Spaghetti Detection. Detection of characteristic print defects in which the plastic forms chaotic strands instead of the intended geometry.
- Nozzle Clumping Detection. Detection of molten material accumulating around the nozzle.
The presence of monitoring systems makes it possible to track the print status and respond promptly to any deviations detected.
Software and Control of the Raise3D T700
Raise3D ideaMaker is used to prepare models — a slicer for configuring print parameters, support structures and material profiles. The program supports the STL, OBJ, 3MF, OLTP, STEP, STP, IGES and IGS formats and runs on Windows, macOS and Linux.
The 3D printer is controlled via a 7-inch touchscreen with a resolution of 1024 × 600 pixels. Wi-Fi, Ethernet and USB 3.0 are available for connectivity. The controller runs on Debian and has 2 GB of RAM and 32 GB of built-in storage.
Applications of the Raise3D T700 3D Printer
The large-format build volume, the TwinFlow system and support for engineering filaments allow the Raise3D T700 to be used for producing prototypes and production tooling. The main areas of application:
- Functional prototyping. Production of equipment housings, mounting panels and test samples for checking geometry and assembly.
- Production tooling. Printing of jigs, templates, and fixtures for positioning and holding parts.
- Large-format housing elements. Production of protective covers, lids and equipment components within the build volume.
- Engineering mock-ups. Creation of scale models of structures, mechanisms and industrial products.
- Auxiliary production components. Printing of holders, guides, brackets and other parts from materials selected to suit the operating conditions.
Raise3D T700 3D Printer Specifications
Main Specifications
| Parameter | Value |
| Printing technology | FFF |
| Build volume | 700 × 500 × 1000 mm |
| Frame material | Aluminium alloy |
| Extrusion system | TwinFlow, two feed channels and one nozzle |
| Extrusion modes | Single Extrusion, Dual Extrusion, Dual Extrusion High Flow |
| Standard nozzle diameter | 0.6 mm |
| Optional nozzle diameter | 0.4 mm |
| Nozzle material | CuCrZr body, SiC tip |
| Maximum nozzle temperature | 420 °C |
| Filament diameter | 1.75 mm |
| Layer height | 0.3 mm |
| Print accuracy | Class IT11 |
| Print speed | 600 mm/s |
| Printhead travel speed | up to 1500 mm/s |
| Printhead acceleration | up to 30,000 mm/s² |
| TwinFlow volumetric flow | up to 80 mm³/s |
| Build platform | Flexible double-sided plate with PEI coating |
| Levelling system | Mesh Leveling with flatness detection |
| Platform heating element | Silicone |
| Maximum platform temperature | 120 °C |
| Active chamber heating | Yes |
| Maximum chamber temperature | 60 °C |
| Electric top cover | Yes |
| Auxiliary heat-dissipation module | Yes |
| Air filtration | HEPA filter with activated carbon |
Software and Control
| Parameter | Value |
| Software | Raise3D ideaMaker |
| Supported file formats | STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS |
| Machine code format | GCODE |
| Compatible operating systems | Windows, macOS, Linux |
| Connectivity interfaces | Wi-Fi, Ethernet, USB |
| USB port | USB 3.0 × 1 |
| Ethernet port | 1 |
| Wi-Fi protocols | WPA, WPA2, WPA3-PSK |
| Touchscreen | 7 inches |
| Display resolution | 1024 × 600 |
| Main camera | 1920 × 1080 pixels |
| Nozzle camera | 2592 × 1944 pixels |
| Filament run-out sensor | Yes |
| Power-loss recovery | Yes |
| Material flow monitoring | Yes |
| Spaghetti defect detection | Yes |
| Detection of plastic build-up on the nozzle | Yes |
| Motion controller | STM ARM Cortex-M7, 550 MHz, DP-FPU |
| Logic controller | RK ARM Cortex-A55, 4 cores, 2 GHz |
| RAM | 2 GB |
| Built-in storage | 32 GB |
| Controller operating system | Debian |
| Electric door lock | Yes |
| Neural processing unit | Up to 1 TOPS, INT8 |
Power Supply, Dimensions and Operating Conditions
| Parameter | Value |
| Power supply | 200–240 V AC, 50/60 Hz |
| Rated parameters | 230 V, 16 A |
| Operating ambient temperature | 15–30 °C |
| Operating relative humidity | 10–90 % |
| Storage temperature | From -25 to +55 °C |
| Relative humidity during storage | 10–90 % |
| Net dimensions | 964 × 792 × 1478 mm |
| Gross dimensions | 1150 × 1060 × 1685 mm |
| Net weight | 150 kg |
Buy the Raise3D T700 Industrial 3D Printer
Buy the Raise3D T700 for large-format 3D printing of functional prototypes, housing parts, engineering mock-ups and production tooling. Our specialists will help you choose the equipment configuration and materials, and advise you on technical specifications and delivery arrangements.
Official Raise3D Reseller
Official Raise3D Reseller in Ukraine
Drawing on over a decade of experience in 3D technologies and our status as an official Raise3D reseller in Ukraine, 3DDevice provides comprehensive support and professional solutions for additive manufacturing, including:
When purchasing the Header 1 at 3DDevice, you receive comprehensive support from our team of experts: from assistance in selecting equipment tailored to your specific tasks and budget, through the initial setup, to stable serial production.