- Stock: In Stock
- Product code: 00-00014576
Hyper Speed PLA is adapted for fast 3D printing
Hyper Speed PLA filament is one of the specially developed filaments from the FFF line of high-speed materials for 3D printing on Raise3D Pro3 series printers.
When 3D printing at high speed, the filament is quickly fed into the build block, and the polymer must quickly change from a solid to a molten state. This speed can cause clogged nozzles and poor adhesion between the layers. Raise3D Hyper Speed PLA has an optimized molecular weight and tuned fluidity. It achieves faster melting in the hot end and much faster cooling after extrusion. As a result, the surface quality of parts made from Hyper Speed materials remains smooth and most of the sharp details are retained. Most importantly, due to its optimized molecular weight, HS PLA exhibits excellent interlayer bonding quality and Z-directional strength. Therefore, HS PLA can be used for conceptual models and shapes, prototyping, etc.
Main about Hyper Speed PLA filament
- Designed for high-speed FFF printing
- High fluidity
- Lower heat capacity
- Easy to print with excellent surface finish
- Excellent adhesion between layers
PLA for Raise3D high-speed printing application
- Hyper-speed printing
- Prototyping and design
- Training and visualization
- Art and sculpture
- Auxiliary means of production
Recommended printing parameters with HS PLA
- Nozzle temperature: 200 – 230 °C
- Bed temperature: 45 – 60 °C
- Layer height: 0.1 – 0.2 mm
- Printing speed: 60 – 300 mm/s
- Cooling fan: On
- Drying temperature: 40 °C
Hyper Speed PLA printing features
- To improve part quality, a cooling fan is highly recommended.
- Premium PLA or Hyper Speed PLA itself can be used as a removable print material for printing supports with HS PLA.
Specifications
| Filament diameter (mm) | 1.75 |
| Material | Hyper Speed PLA |
| Density (g/cm3) | 1.21 |
| Print temperature (°C) | 200 – 230 |
| Substrate For Printing | BuildTak, Blue Tape |
| Heated table | Necessary |
| Table temperature (°C) | 45 – 60 |
| Closed Camera | Not required |
| Cooling (%) | Enabled |
| Print speed (mm/s) | 50 – 300 |
| Drying conditions | 40 °C |
| Compatibility with the printer | Pro3, Pro3 Plus |
| Compatibility with Materials | Premium PVA+, Premium PLA |
| Producing country | China |
| Weight of Plastic (kg) | 1.0 |
