PC filament Intamsys 1.75 mm 1 kg White

PC Plastic Intamsys for Impact-Resistant and Heat-Resistant Functional Parts

PC Plastic Intamsys 1 kg 1.75 mm White is a polycarbonate filament for FDM/FFF 3D printing of functional parts and prototypes that operate under mechanical and thermal loads. The material combines impact resistance, rigidity, and heat resistance, characterized by low shrinkage and minimal water absorption. Reduced warping tendency helps maintain the geometry of printed parts.

Material Advantages

• Resistance to tensile and bending loads. The tensile strength of PC Intamsys is 60.7 MPa, and the bending strength is 84.3 MPa. These indicators characterize the ability of printed parts to withstand tensile and bending loads.
• Rigidity of printed parts. The Young's modulus is 2480 MPa, and the bending modulus is 1685 MPa. These characteristics are important for parts where elastic deformation under load needs to be limited.
• Resistance to impact loads. The notched impact toughness is 15.6 kJ/m². This indicator characterizes the material's behavior under short-term impact loads.
• Thermal characteristics. The glass transition temperature of PC Intamsys is 113 °C, and the filament softening temperature is 127–130 °C. These values characterize the material's behavior when heated and are not indicators of HDT or Vicat.
• Dimensional stability. PC Intamsys is characterized by low shrinkage during molding, minimal water absorption, and reduced warping tendency. This helps maintain the geometry of printed parts.

3D Printing Features

PC Intamsys is printed with a heated platform and working chamber. Controlling the temperature conditions during part formation helps reduce the risk of warping and deformation during cooling.

HIPS can be used to create breakaway supports during PC printing.

Drying

Before printing, it is recommended to dry PC Intamsys at a temperature of 80 °C for 8 hours.

Application Areas

PC Intamsys can be used for:

• functional prototypes;
• production parts;
• automotive components, including bumpers;
• parts for design verification and functional testing;
• rigid functional parts that operate under mechanical and thermal loads.

Main Physical Characteristics

Thermal Characteristics

Mechanical Characteristics

Additional Properties

Printing Settings

The nozzle temperature and drying mode correspond to the PC Intamsys marking on the spool. The platform, chamber, and cooling temperatures may require adjustment depending on the 3D printer model, part geometry, and printing conditions.

Order PC Plastic Intamsys on Our Website

Need to check the compatibility of PC Intamsys with your 3D printer or select working parameters for a specific task? Contact 3DDevice managers — we will help you select the material and settings according to the equipment and requirements for the finished part. We deliver across Ukraine.