- Stock: In Stock
- Product code: 00-00014449
3D Printer for Continuous Production with Intelligent Control Intamsys Funmat Pro 310 Apollo
Intamsys Funmat Pro 310 Apollo is a high-temperature industrial FFF 3D printer with an independent dual-nozzleIDEX system, designed for manufacturing functional parts from high-performance polymers andcomposites. The printer has a build area of up to 305 × 260 × 260 mm when using a single nozzle or 260 × 260 × 260 mm indual-nozzle mode. The device is equipped with extruders with a maximum heating temperature of up to 450 °C,a heated platform up to 160 °C, and a fully enclosed chamber with a temperature of up to 100 °C. The system supports a printing speed of up to 500 mm/s, and when working with PAEK family materials — up to 200 mm/s. The 3D printer is intended for use in research laboratories, engineering centers, and manufacturingenterprises where the production of functional parts from high-temperature polymers and compositematerials is required.
Model Features and Functionality
Temperature Control
Funmat Pro 310 Apollo is equipped with a high-temperature printing system. The control of the temperature of the extruders,platform, and working chamber allows for maintaining stable printing conditions and increases the repeatability of results.
Printing Process Control and Traceability
- Real-time production data recording.
- Tracking the history of part manufacturing and materials used.
- RFID recognition of spools for automatic filament identification.
INTAM Box — Filament Storage and Drying System
The package includes the INTAM Box system for storing, drying, and feeding material. It consists of twoindependent airtight compartments and supports automatic recognition of installed spools and filament feeding.
- Placement of two spools from 1 kg to 3 kg each.
- Dual-channel heating up to 65 °C.
- Real-time temperature and humidity monitoring.
- Protection against filament tangling and light indication of system status.
Independent Dual-Nozzle IDEX System
The printer is equipped with two independent extruders that support Duplicate Mode and Mirror Mode.
- Independent control of two extruders;
- simultaneous printing of two identical parts in Duplicate Mode;
- printing of symmetrical products in Mirror Mode;
- reduction of production time for serial batches of parts.
Supported Materials
The printer supports a wide range of high-temperature and engineering polymers.
- PAEK family materials: PEEK, PEEK-CF, PEEK-GF, PEKK, VICTREX AM 200 FIL
- Engineering thermoplastics: PC, PC-ABS, PC-FR, ABS-HS, PA6/66, PA12, ASA, PPS
- Composites: PPA-CF, PPA-GF, PPS-CF, PPS-GF, and other reinforced materials
This set of plastics allows the device to be used for prototyping, manufacturing functionalparts, tooling, and end products with increased requirements for mechanical strength, heat resistance, and chemicalresistance.
Applications
- Aviation and Aerospace Industry: brackets, air ducts, seals, electronic housings,waveguides, antennas, UAV parts
- Robotics and Mechanical Engineering: gears, reducers, joints, manipulators, supporting frames
- Oil and Gas Industry: seals, fittings, sensor housings, pump components
- Medical Field: surgical templates, prosthetics, rehabilitation devices
- Automotive Industry: engine parts, transmissions, electrical components
- Manufacturing and Tooling: fixtures, insulating elements, inserts, sensor housings
- Education and Research: engineering developments, educational projects, service printing
Technical Specifications
| Parameter | Value |
| Printing Technology | FFF |
| Chamber Type | Fully enclosed |
| Extruder Type | IDEX |
| Number of Nozzles | 2 |
| Max. Number of Spools | 2 spools up to 3 kg each |
| Filament Diameter | 1.75 mm |
| Layer Thickness | 0.1–0.3 mm |
| Max. Nozzle Temperature | 450 °C |
| Max. Platform Temperature | 160 °C |
| Max. Chamber Temperature | 100 °C |
| Max. Printing Speed | Up to 500 mm/s; for PAEK materials — up to 200 mm/s |
| Max. Printing Acceleration | Up to 8000 mm/s² |
| Build Surface | HPP Build Plate and EP Build Plate |
| Build Area (single nozzle) | 305 × 260 × 260 mm |
| Build Area (dual nozzle) | 260 × 260 × 260 mm |
| Platform Calibration | Up to 100 points, automatic extruder calibration |
| Resolution | XY: 16 μm; Z: 1.25 μm |
| Filament Control | Sensor, automatic loading, RFID |
| Remote Control | Yes |
| Display | 7-inch touchscreen |
| Software | INTAMSUITE NEO |
| Interfaces | Wi-Fi, Ethernet, USB |
| Max. Power | 1800 W |
| Input Voltage | 100–120 V / 16 A or 200–240 V / 8 A |
| Filtration | HEPA and activated carbon |
| Cooling | Fan |
| Safety | Door lock, overheat protection, overload protection |
| Operating Temperature | 0 °C – 30 °C |
| Operating Humidity | 20–70 % |
| Dimensions | 700 × 655 × 750 mm |
| Weight | 80 kg |
Ordering and Consultation
Place your order for the industrial 3D printer Intamsys Funmat Pro 310 Apollo online or contact ourspecialists for consultation.
Our specialists will help you choose the printer configuration, materials, and components according to the requirements of yourproject. Delivery is carried out throughout Ukraine.
