xTool MetalFab Laser Welder and CNC Cutter 1200W

Laser Welder and CNC Cutter xTool MetalFab Laser Welder and CNC Cutter 1200W

xTool MetalFab Laser Welder and CNC Cutter 1200W is a professional complex for high-precision metal processing that combines the capabilities of manual laser welding, manual laser cutting, laser surface cleaning, and automated CNC cutting in a single modular system. A powerful 1200W fiber laser ensures high performance when working with structural and non-ferrous metals, and after installing the welding module on the CNC platform, the system transforms into a high-precision machine for automatic sheet metal cutting with a working area of 610 × 610 mm and through-feed of long workpieces.

Technical Features and Functionality of the Complex

4-in-1 Multifunctional System

xTool MetalFab combines four key metal processing technologies:

• manual laser welding;
• manual laser cutting;
• laser cleaning of metal surfaces;
• automated CNC cutting.

Thanks to its modular design, the operator can quickly switch between different operating modes without using separate specialized machines, which is especially important for modern productions with a wide range of parts.

1200W Fiber Laser

The 1200W Pro version uses a modern fiber optic radiation source with a wavelength of 1080 ± 10 nm, supporting continuous welding, spot welding, and pulse welding modes. The increased power allows working with thicker metals, ensuring deep penetration, stable seams, and high speed of work even during serial production.

Automated CNC Sheet Metal Cutting

After installing the laser welder on the CNC platform, the complex transforms into a high-precision laser cutter with the following characteristics:

• working area 610 × 610 mm;
• through material feed 610 × ∞ mm;
• movement speed up to 400 mm/s;
• positioning accuracy ±0.1 mm.

The through-table design allows working with metal sheets of virtually unlimited length, significantly expanding the equipment's application in production processes.

Manual Laser Cutting

The laser head can be used as an autonomous handheld cutter for processing large-sized products or parts that cannot be installed on the CNC platform. The 1200W model supports manual cutting of carbon and stainless steel up to 5 mm. This provides greater versatility compared to the 800W version and allows performing a wide range of installation and repair work without using a separate plasma cutter.

High-Quality CNC Cutting Without Additional Mechanical Processing

In automatic cutting mode, xTool MetalFab 1200W provides a clean edge with minimal burrs.

The maximum cutting thickness without burrs is:

• 10 mm — carbon and galvanized steel;
• 5 mm — stainless steel and titanium;
• 4 mm — aluminum;
• 3 mm — brass.

If necessary, the system can cut even thicker materials — for example, up to 12 mm of carbon steel with subsequent burr removal.

Professional Laser Welding

xTool MetalFab Laser Welder and CNC Cutter 1200W provides high-precision laser welding of carbon, stainless, and galvanized steel, aluminum, brass, titanium, and other compatible metals. The 1200W fiber laser forms a narrow seam with a minimal heat-affected zone, helping to reduce part deformation and minimize subsequent mechanical processing. The maximum recommended welding thickness is up to 5 mm for steels and up to 4 mm for aluminum, brass, and titanium.

Intelligent Technologies for Stable Quality

The EasySet Library is used for quick equipment setup, automatically selecting optimal parameters depending on the material and its thickness. AI Seam Assist technology helps maintain the correct position of the welding head during seam execution, and the Smart Fill system optimizes the supply of filler wire, ensuring uniform filling of the weld joint. Additionally, the proprietary SaveGas™ Nozzle optimizes the supply of protective gas, reducing its consumption and improving seam quality.

Laser Surface Cleaning

The complex supports a laser cleaning mode that allows quickly removing rust, scale, paint, grease, and other contaminants without using abrasives or chemicals. This cleaning method does not damage the metal base and provides high-quality surface preparation before welding, cutting, or further processing.

Who is xTool MetalFab 1200W Suitable For?

xTool MetalFab 1200W will be an effective solution for enterprises working with sheet metal and looking to combine several production processes in one complex. The equipment is suitable for machine-building and metalworking enterprises, manufacturers of metal structures, advertising production companies, furniture manufacturers, service centers, and workshops where high precision, speed of work, and minimal time spent on reconfiguration are important. Combining manual laser welding, cutting, cleaning, and automatic CNC cutting allows one operator to perform the full cycle of metal processing on a single platform, optimizing the production process and reducing the need for separate equipment.

MetalFab CNC Cutter Package Contents

1. xTool MetalFab CNC Cutter Laser Cutting Machine — 1 pc.
2. Cleaning Nozzle — 1 pc.
3. Telescopic Cutting Nozzle — 1 pc.
4. Cutting Head — 1 pc.
5. Ceramic Ring — 1 pc.
6. Power Cable — 1 pc.
7. Communication Cable — 1 pc.
8. Worktable Slats — 5 pcs.
9. Z-shaped Key — 1 pc.
10. External Antenna — 1 pc.
11. Cable Locking Block — 1 pc.
12. Hook — 1 pc.
13. Laser Alignment Card and Red Stamp Pad — 1 set.
14. Bubble Level — 1 pc.
15. Computer Connection Cable — 1 pc.
16. Hex Key 3 mm — 1 pc.
17. Hex Key 4 mm — 1 pc.
18. Wrench — 1 pc.
19. Storage Box — 1 pc.
20. Screws M4 × 30 — 15 pcs.
21. Screws M4 × 10 — 5 pcs.
22. Screws M6 × 12 — 10 pcs.
23. Camera Calibration Plate — 1 pc.
24. Metal Sheets — 1 set.
25. Pipe Clamp — 1 pc.
26. Base — 1 pc.
27. Exhaust Fan — 1 pc.
28. Smoke Exhaust Pipe — 1 pc.
29. Safety Instructions — 1 pc.
30. Quick User Guide — 1 pc.

MetalFab Laser Welder 1200W Package Contents

1. xTool MetalFab Laser Welder — 1 pc.
2. Wire Feeding Mechanism — 1 pc.
3. Wire Feeding Mechanism Cable — 1 pc.
4. Wire Feeding Tube — 1 pc.
5. Stainless Steel Welding Wire Diameter 1 mm — 1 spool.
6. Drive Rollers 0.8/1.0 mm — 2 pcs.
7. Drive Rollers 1.2/1.6 mm — 2 pcs.
8. Wire Feeding Nozzle 1.2/1.6 mm — 1 pc.
9. Cutting Tip — 1 pc.
10. Welding Nozzle for Autonomous Welding — 1 pc.
11. Cleaning Nozzle — 1 pc.
12. Protective Lenses — 5 pcs.
13. Laser Safety Glasses 1080 nm — 1 pc.
14. Heat-Resistant Gloves — 1 pair.
15. Tubing with Outer Diameter 10 mm — 1 pc.
16. Power Cable — 1 pc.
17. Workpiece Detection Cable — 1 pc.
18. Stainless Steel 304 Sheets Thickness 2 mm — 4 pcs.
19. Welding Head Holder Components — 1 set.
20. Key — 1 pc.
21. USB Drive — 1 pc.
22. Hex Key 2 mm — 1 pc.
23. Hex Key 2.5 mm — 1 pc.
24. Round Tip Cotton Swabs — 1 set.
25. Pointed Tip Cotton Swabs — 1 set.
26. Safety Instructions — 1 pc.
27. Quick User Guide — 1 pc.

Technical Specifications

Warranty, Service, and Technical Support

The company 3DDevice is a supplier of professional equipment for laser processing and digital manufacturing. If you plan to purchase the xTool MetalFab Laser Welder and CNC Cutter 1200W, our specialists will help you choose the optimal system configuration, consult on connecting additional equipment, and provide information on operating features.