PETG plastic KLEMA 1.75 / 2.85 / 3.00 mm, 1 kg
- Stock: In Stock
- Product code: 00-08800301
₴999.00
Ex Tax: ₴999.00
PETG Plastic KLEMA
PETG KLEMA plastic is resistant to organic solvents, acids, and alkalis, wear-resistant, and heat-resistant.PETG is a very flexible and strong plastic, with significantly less shrinkage than ABS, does not crack, temperature range from -40 °C to + 70 °C, and has good "transparency". The downside is its solubility in benzene. This plastic is certified,complies with the RoHS directive, and has been tested in our 3D printing center. It is very suitable for printing gears,mechanisms, reducers, structures, and various strong products with minimal shrinkage.
Specifications
| Print Type | FDM |
| Filament Diameter | 1.75 mm, 2.85 mm, and 3.00 mm |
| Density | 1.27 g/cm3 |
| Tensile Strength | 49 MPa |
| Flexural Strength | 68 MPa |
| Compressive Strength | 65.4 MPa |
| Elongation at Break | 228% |
| Softening Temperature | 64°C |
| Maximum Short-term Operating Temperature | withstands up to 80°C |
| Recommended Printing Temperature | 220 – 250°C |
| Platform Temperature | 70 – 90°C |
| Printing Speed | 40 – 80 mm/s |
| Spool Weight | 1 kg |
| Country of Manufacture | China |
PETG KLEMA. Available Colors:
