- Stock: In Stock
- Product code: 00-00014612
- SKU: RP-FB-BLNEXL-01
The Fuse Blast Large Tumbler Basket Liner Kit is a genuine replacement consumable for the Formlabs Fuse Blast post-processing station, supplying everything needed to completely reline the Large Tumbler Basket. The kit includes fresh open-cell foam panels for the basket floor and side wall, a structural plastic mounting ring, and a full set of push-pin plastic rivets — all the components required to return the basket to factory condition for continued SLS powder removal and part surface finishing.
| Compatible System | Fuse Blast — Large Tumbler Basket |
|---|---|
| Liner Material | Open-cell foam, perforated |
| Fastener Type | Push-pin plastic rivets (included) |
| Application | SLS post-processing — powder removal and part finishing |
The image below shows all kit components laid out before installation: the large circular foam floor disc, the rectangular foam side-wall strip, the slotted black plastic mounting ring, a full set of long push-pin rivets, and the smaller plastic clip-type fasteners used to secure the ring assembly.
Why Liner Replacement Matters in SLS Post-Processing
The Fuse Blast Large Tumbler Basket is the rotating chamber where SLS-printed parts tumble together with blast media to shed residual PA12, PA11, or PA12 GF powder from surfaces and internal cavities. The foam liner performs two simultaneous functions: it cushions part-to-part contact to prevent surface damage, and its open-cell structure allows loosened powder and blast media particles to migrate freely through the basket wall rather than accumulating inside the working chamber.
Over time and through repeated blast cycles, the foam degrades. Abrasion from parts and media gradually thins the material, chemical exposure to fine nylon powder compresses the open-cell structure, and the plastic rivets that anchor the liner can fracture or loosen under repeated mechanical stress. A worn liner creates uneven media flow, reduces cushioning, and produces inconsistent surface quality across batches — all of which are avoidable with timely, proactive replacement.
Everything for a Full Basket Reline in One Kit
This kit is designed for a complete relining — not a partial repair. The basket floor disc, the side-wall strip, the structural mounting ring, and the full complement of both fastener types are all included. There is no need to source hardware separately: the entire liner assembly is replaced at once, ensuring uniform performance across the whole basket surface from the very first cycle after maintenance.
The view below shows the basket after full liner installation, photographed from directly above. The open-cell foam covers the entire base, with rivets seated evenly around the perimeter securing the mounting ring and liner to the perforated metal basket wall.
Open-Cell Foam: Flow-Through by Design
The liner material is engineered specifically for blast-media environments. Its open-cell architecture allows blast media and fine nylon powder particles to pass through the liner rather than accumulating on its surface. During tumbling, this flow-through behaviour keeps the basket interior clean and keeps the media in continuous circulation. The punched hole pattern reinforces this drainage function and prevents material bridging across the liner surface during wet-blast operations.
The macro image below captures the liner texture after a blast cycle: the interconnected cell matrix, the regular punched drainage holes, and the even distribution of residual liquid across the foam surface — confirming compatibility with both dry tumbling and wet blast-cleaning protocols used in Formlabs SLS workflows.
Technical specifications of the Fuse Blast Large Tumbler Basket Liner Kit
Compatibility
| Compatible Unit | Fuse Blast — Large Tumbler Basket |
|---|---|
| Compatible SLS Materials | PA12, PA12 GF, PA11, TPU 90A Powder |
Liner Assembly
| Liner Material | Open-cell foam, perforated |
|---|---|
| Liner Components | Floor disc + side-wall strip |
| Mounting Ring Material | Rigid plastic, slotted (black) |
| Fasteners Included | Push-pin plastic rivets + plastic clip screws |
What's in the box
- Large Tumbler Basket floor liner — circular open-cell foam disc
- Side-wall liner strip — rectangular open-cell foam panel
- Structural plastic mounting ring (slotted, black)
- Push-pin plastic rivets — full replacement set
- Plastic clip screws — ring mounting hardware
Why choose 3DDevice?
As an official representative of Formlabs, we guarantee the best price, authorised service, and official warranty. 3DDevice has specialised in professional 3D technologies since 2012 — over a decade of hands-on experience deploying and supporting Formlabs SLS ecosystems across research institutions, engineering companies, and production facilities throughout Ukraine. We stock genuine Formlabs consumables and replacement parts, deliver to all regions of Ukraine, and provide dedicated post-sale support to keep your Fuse Blast running at peak efficiency. Contact us for current availability and pricing.
