- Stock: In Stock
- Product code: 00-00014392
Dual Extrusion and High-Temperature Printing in the CreatBot D600 Pro3 HS 3D Printer
CreatBot D600 Pro3 HS is an industrial FDM 3D printer with an Auto-Raising Smart Extruders dual extrusion system, active thermal chamber, and a build volume of 620 × 620 × 620 mm. The combination of a hotend heated up to 420 °C and a chamber with a temperature up to 80 °C allows working with both standard and engineering and composite materials. The device is designed for large-format printing, multi-material production, and manufacturing complex parts using a separate support material. The printer's motion system operates under optimized Klipper firmware, providing print speeds up to 300 mm/s and volumetric extrusion productivity up to 90 mm³/s, while the Dual Nozzle Shutter mechanical system is responsible for switching between tools and preventing inactive plastic leakage. The printer is equipped with a built-in filament drying compartment with adjustable temperature control from 0 to 70 °C.
Key Features of CreatBot D600 Pro3 HS
- Auto-Raising System with Shutter Technology: a design with two smart extruders that automatically raise and mechanical Dual Nozzle Shutter to prevent inactive plastic leakage when switching between main material and supports.
- Industrial Servo Motors and Reinforced Rails: using industrial servo motors combined with reinforced linear guides to enhance positioning accuracy and movement stability at high speeds.
- Remote Control with Camera: remote monitoring technology that allows not only observing the process
through a mobile app but also controlling print parameters — changing speed, temperature, or pausing the
process. This provides operational control, helps avoid defects, and ensures successful completion of long
prints of large models.
- Automatic Nozzle Offset Calibration on X, Y, and Z Axes: HD Camera macro shooting system and dual photoelectric sensors for fully automatic digital nozzle offset adjustment on X, Y axes with an accuracy of 0.02 mm and Z with an accuracy of 0.005 mm.
- Eddy Current Platform Calibration: a continuous scanning system based on high-frequency electromagnetic sensors that levels the table in 60 seconds with an accuracy of 0.001 mm.
- Ultra Air Filter Air Cleaning: a two-stage filtration system with a primary HEPA filter and activated carbon that captures up to 99.995% of fine particles and absorbs volatile organic compounds VOCs and odors.
- Independent Quad-Z System: four independent Z-axis drive motors that automatically adjust the height of each corner of the platform to compensate for tilt, eliminate warping, and ensure parallelism during printing of massive models.
- Filament Control and Backup Mode: filament end sensors with automatic print continuation through the second extruder in case the material runs out in the main extruder, ensuring continuity of the production process.
Auto-Raising Dual Extrusion Functionality
The design of CreatBot D600 Pro3 HS is based on the Auto-Raising dual smart extruders system with a mechanism for vertical lifting of the inactive nozzle. Both extruders are integrated into a single high-speed printing unit controlled by Klipper firmware. The powerful hotend provides volumetric extrusion productivity up to 90 mm³/s and supports heating up to 420 °C. The use of two extruders with independent lifting of the inactive nozzle allows:
- printing large-format products using two different filaments in one cycle;
- using specialized support materials, including soluble or easily removable plastics;
- forming complex functional parts for industrial purposes with a combination of engineering and composite materials.
This architecture allows manufacturing elements with complex internal geometry, thin walls, and complex overhanging elements, ensuring high surface quality in areas of contact with supports.
Thermostable Environment for Large-Scale Printing
The printer is equipped with a fully enclosed chamber with forced convection heating up to 80 °C and double thermal insulation of the body. The constant high temperature of the internal environment neutralizes thermal stresses and material shrinkage, preventing deformation and delamination of large models made of ABS, PC, Nylon, and other engineering copolymers, and also ensures high interlayer adhesion.
Material Compatibility and Temperature Range
Thanks to the high-temperature hotend with heating up to 420 °C, active thermal chamber, and platform with heating up to 120 °C, the printer is compatible with a wide range of industrial and engineering filaments.
- Standard and Engineering Plastics: PLA, ABS, ASA, PETG, TPU, PC, polyamides (PA, Nylon).
- High-Temperature and Industrial-Grade Composite Materials: materials filled with carbon fiber and glass fiber (ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF).
- Support Materials: PVA, Breakaway, and other compatible auxiliary filaments that simplify post-processing of models.
Technical Specifications
| Parameter | Value |
| Printing Technology | FDM |
| Chamber Type | Closed |
| Extruder Type | Smart Dual Extruders with auto nozzle lifting |
| Number of Nozzles | 2 |
| Filament Diameter | 1.75 mm |
| Standard Nozzle | 0.6 mm |
| Supported Nozzles | 0.3 / 0.4 / 0.6 / 0.8 / 1.0 mm |
| Min. Layer Height | 0.05 mm |
| Max. Nozzle Temperature | 420 °C |
| Max. Platform Temperature | 120 °C |
| Max. Chamber Temperature | 80 °C |
| Max. Print Speed | 300 mm/s |
| Max. Volumetric Productivity | 90 mm³/s |
| Build Surface | Aviation aluminum plates with magnetic removable coating |
| Max. Print Area | Single Extrusion: 620 × 620 × 620 mm Dual Extrusion: 565 × 620 × 620 mm |
| Automatic Platform Leveling | Yes |
| Z-Axis Kinematics | 4 independent motors with tilt compensation |
| XY Positioning Accuracy | 0.011 mm |
| Z Positioning Accuracy | 0.0025 mm |
| Nozzle Offset Technology | On XY Axes: HD Camera Dual Nozzle Offset On Z Axis: Dual Photoelectric Sensor |
| Material Monitoring/Control | Filament end sensors + Continuous Printing Backup Mode |
| Filament Drying Chamber | Built-in compartment with timer-controlled heating from 0 to 70 °C |
| Air Filtration System | Two-stage: HEPA + activated carbon |
| Print Monitoring Camera | Built-in HD camera |
| Display | 7-inch full-color touchscreen |
| Control Firmware | Klipper |
| Software (Slicers) | CreatWare, OrcaSlicer, Cura, Slic3r |
| Supported File Formats | Input: STL, OBJ, AMF Print Code: GCODE |
| Compatible OS | Windows, Mac OS |
| Connection Interfaces | USB / U-disk / Wi-Fi / LAN |
| Electrical Parameters | Printer rated power: 2500 W Chamber heater power: 3000 W Input voltage: 240 V, 50–60 Hz |
| Safety Features | Door opening sensor with lock |
| External Model Cooling | Yes |
| Device Dimensions | 1150 × 950 × 1250 mm |
| Device Weight | 250 kg |
Package Contents
The printer package includes:
- Glue stick for the build plate — 2 pcs.
- Tweezers — 1 pc.
- Nozzle cleaning needles, 35 mm and 200 mm long — 2 pcs.
- Open-end wrench 5.5×7 — 1 pc.
- M13 tubular socket wrench — 1 pc.
- Open-end wrench 8×10 — 1 pc.
- Spatula / scraper with a polished working surface for removing printed models — 1 pc.
- Phillips screwdriver — 1 pc.
- Flat-head screwdriver — 1 pc.
- Feeler gauge (0.1 mm) for calibration — 1 pc.
- Hex key set — 1 set including one piece each of the following sizes: 1.5, 2.0, 2.5, 3.0, and 4.0 mm.
- Hardened steel nozzle set — 1 set including 2 pcs. of each nozzle diameter: 0.4, 0.6, 0.8, and 1.0 mm.
- Extruder idler arm kit — includes a 0.6810 spring and an M4×16 countersunk hex socket screw.
- 6×40 heating cartridge with a 3 cm cable length (80 W) — 1 pc.
- PT1000 thermistor 4×20 with a 3 cm cable length — 1 pc.
- TMC5160 stepper driver — 2 pcs.
- Lubricant for gears and mechanical components — 2 small packages.
- USB flash drive — 1 pc.
- M5×8 hex socket cylinder head mounting screws — 10 pcs.
- Aviation connector with cable — 2 pcs.
- Sample filament on eco-friendly cardboard spools: PLA, 1 kg — 1 pc.; PLA-CF, total weight 2 kg — 2 pcs.
Note: The CreatBot D600 Pro3 HS 3D printer is equipped with 0.6 mm nozzles as standard from the factory.
Ordering a 3D printer, selection of materials and accessories
You can purchase the CreatBot D600 Pro3 HS model on our website with delivery across Ukraine. If you need assistance in selecting high-performance engineering thermoplastics, interchangeable nozzles of different percentages, or additional components for specific industrial tasks — our specialists are always ready to consult and select the necessary materials and accessories.
