3D printer Anycubic Kobra S1

Anycubic Kobra S1: high-speed printing in various colors

The Anycubic Kobra S1 FDM 3D printer for home and work is a comprehensive solution that addresses the main issues of 3D printing: wet filament, cable clutter, and endless manual calibration. The combination of CoreXY kinematics and the intelligent ACE Pro station (optional) transforms the process from a hobby into stable production of objects of any complexity.

Advantages and Features of Anycubic Kobra S1

• High speed and acceleration: the device can reach printing speeds of up to 600 mm/s (recommended — 300 mm/s) and acceleration up to 20,000 mm/s². This allows, for example, printing a standard Benchy test model in 15 minutes.
• Enclosed CoreXY design: the model is made in a fully enclosed case using CoreXY kinematics, ensuring high stability and accuracy during high-speed printing.
• ACE Pro System: an intelligent 2-in-1 module that not only feeds the filament but also actively dries it during the printing process.
• High-temperature quick-release hotend: the nozzle heats up to 320°C and is equipped with an aerospace-grade ceramic tube for better heat resistance. The design allows for tool-free hotend replacement.
• Intelligent functions (AI): thanks to the built-in HD camera, the printer supports automatic error detection (spaghetti), belt tension monitoring, and the ability to record timelapses.
• Automatic leveling LeviQ 3.0: the system provides precise platform calibration and automatic Z-offset adjustment, significantly simplifying the first launch.
• Low noise level: in normal mode, the printer operates at ≤46 dB, and in a special quiet mode, the noise level is reduced to 44 dB.
• Extensive material compatibility: in addition to standard plastics (PLA, PETG, ABS, ASA), the printer can work with flexible TPU (only in single-color mode), as well as professional materials such as PC, PA, and carbon fiber.
• Printing area: the working volume is 250 x 250 x 250 mm, and the printing platform is equipped with a magnetic PEI spring steel sheet and heats up to 120°C.
• Modern software: support for Anycubic Slicer Next (based on Orca) and the Anycubic App mobile application allows for remote monitoring and control of the printing process.

CoreXY Speed and Enclosed Chamber Stability

The Kobra S1 is based on CoreXY architecture with a fully enclosed case. Here, the print head moves with minimal inertia, allowing speeds of up to 600 mm/s with acceleration of 20,000 mm/s². For context: a standard Benchy prints in just 15 minutes, while surface quality remains at the level of professional machines.

To ensure speed does not compromise quality, the printer incorporates:

• Active resonance compensation: suppresses vibrations, eliminating ringing and ghosting effects on models.
• Flow Control: an intelligent algorithm precisely doses plastic feed, ensuring perfect angles and joints.
• Thermal stability: the enclosed case protects the model from drafts and temperature fluctuations, which is critical for printing ABS, ASA, and nylon (PA).

ACE Pro Ecosystem: Color, Drying, and Continuous Process

The Anycubic Color Engine (ACE) Pro module (purchased separately) is a complete material preparation and feeding station. Unlike conventional color change systems, ACE Pro solves two tasks simultaneously:

• Multimateriality: printing in 4 colors (or up to 8 when combining modules) with automatic spool change.
• Active drying: a built-in heating element maintains optimal filament humidity right during printing. This prevents filament brittleness and "webbing" on the model.
• The system is also equipped with a filament tangle sensor and an automatic spool replacement function (Backup Mode): if one spool runs out, the printer automatically switches to a similar one in the adjacent slot.

Intelligent Control and LeviQ 3.0

Kobra S1 minimizes the risk of defects thanks to the AI camera. It monitors the process in real-time and pauses printing when "spaghetti" or first layer defects are detected.

The LeviQ 3.0 system fully automates preparation:

• Z-offset without user intervention: the printer automatically determines the nozzle height relative to the table.
• Auto-calibration: forget about knobs under the table and sheets of paper — electronics align geometry using a grid of high-precision sensors.

What’s included?*

• Anycubic Kobra S1 3D printer
• Filament spool holder
• Power cable
• USB flash drive
• Set of Allen keys (2.5 / 2.0 / 1.5 mm)
• Mounting screws
• Activated carbon filter
• Nozzle cleaning module
• Silicone nozzle protector (cover)
• Nozzle cleaner
• Technical lubricant

*The manufacturer reserves the right to change the contents of the package without prior notice

Anycubic Kobra S1: price and features are optimally balanced!

Technological Nuances for Professionals

• All-metal hotend (320°C): quick-release design allows for nozzle changes in seconds. The temperature limit provides access to high-temperature materials: PC, PA, and composites with carbon fiber.
• Quiet mode: at a noise level of 44 dB, the printer can be left in a work office or living room — it is no louder than a quiet conversation.
• Remote control: through the Anycubic App, you can monitor printing via the camera and change settings directly from your smartphone.

What Tasks Does Anycubic Kobra S1 Solve?

Anycubic Kobra S1 is an excellent tool for designers, engineers, and small business owners. It is ready to work "out of the box" (assembly takes 20 minutes) and is suitable for creating bright multicolor prototypes as well as for serial production of functional parts from engineering plastics.

Buy the Anycubic Kobra S1 3D printer in Ukraine with a warranty, at a loyal price, both on the website and by phone — call us! Our experts will help you choose 3D equipment and accessories for home and industrial use.