- Stock: In Stock
- Product code: 00-00014149
Glue for 3D Printing Magigoo Supergrip 50 ml
Magigoo Supergrip Glue — adhesive for 3D printing, designed for flexible and polymer plates. This glue provides reliable adhesion of the first layer to the platform, helping to reduce the risk of detachment and deformation of the model. After cooling the table, the 3D part is easily removed without a spatula, and the glue residues are easily cleaned with a clean damp soft cloth.
Main Advantages of Magigoo Supergrip Glue for 3D Printing
- Reliable adhesion of models to the 3D printing surface.
- Easy removal of parts after table cooling.
- Works with smooth and textured PEI plates.
- Suitable for flexible plates and polymer surfaces.
- Protects against scratches and damage.
- Applies in a thin and even layer.
- Easily removed from the surface with a clean cloth moistened with clean water.
- Helps extend the lifespan of flexible plate coatings. Reduces the risk of surface damage during the removal of printed models.
- Compact package size. Convenient to take with you to production, workshop, or service center.
Which Plastics are Suitable for Magigoo Supergrip
Magigoo Supergrip is compatible with various 3D printing filaments, including PLA, PETG, TPU, ASA, HIPS plastics, etc. Recommended usage parameters for each type of plastic may vary depending on the material composition.
| Printing Material | Table Temperature | Printer Type |
| PLA | 45–60 °C | Open |
| PETG | 60–90 °C | Open |
| ASA | 90–110 °C | Closed |
| ABS | 90–110 °C | Closed |
| TPU | 20–80 °C | Closed |
Where to Best Use Magigoo Supergrip
Magigoo Supergrip is suitable for application on popular 3D printer platform surfaces, including glass, PEI, BuildTak, flexible powder plates, Kapton tape, etc. It helps ensure the adhesion of the first layer, which is especially important when printing large models or parts with an increased risk of deformation. After printing is complete and the table cools down, the model is easily removed, and glue residues are easily removed with a clean damp cloth.
How Magigoo Supergrip Works
After heating the printing table, Magigoo Supergrip glue provides strong adhesion of the first layer to the platform, helps to stably hold the model during 3D printing, and reduces the risk of deformation and detachment of parts. After the surface cools, the adhesion weakens, allowing the model to be easily separated from the platform without excessive effort.
Step-by-Step Usage
- Shake the bottle well before applying.
- Press the applicator to the table surface to activate the spring valve.
- Apply the glue in linear motions over the entire required area.
- Start 3D printing with the recommended table temperature.
- After completion, wait for the platform to cool down.
- Remove the model without abrupt movements. No tools are needed for this!
- Clean the working surface with a clean cloth moistened with clean water.
- Store the glue in an upright position with the cap closed.
Do not squeeze the bottle if the applicator is not pressed to the table. It is recommended to apply the glue to a cold surface.
Tips from 3DDevice Experts
- Apply in a thin layer. A nearly thin even coating is sufficient. Excessive glue does not improve adhesion and may leave more marks.
- Wait for the platform to cool completely. Do not attempt to remove the model immediately after printing is complete. Adhesion weakens after the table cools.
- Clean the platform with clean water. Magigoo Supergrip residues are easily removed with clean water and a soft cloth.
Need quality glue for 3D printing? Order Magigoo Supergrip 50 ml — glue for 3D printing complex materials (ASA, ABS, PLA, TPU, PETG) that provides reliable adhesion of the first layer and allows easy removal of the finished 3D model without damage.
