- Stock: In Stock
- Product code: 00-00000097
- SKU: FS1-FB-01
Formlabs Fuse Blast – polishing machine for SLS prints
On this page you can buy Formlabs Fuse Blast for Formlabs Fuse SLS 3D printing ecosystem. It is a sandblasted, automated system that produces professional, uniform prints with a clean, smooth surface. The post-processing of prints is faster and easier than ever before. An easy-to-use, fully automated solution for powder cleaning and polishing parts printed on an SLS 3D printer.
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and optimizes the reflow workflow, allowing the entire printer build chamber to be completely cleaned of printed parts in as little as 15 minutes, dramatically reducing labor time and costs. With the optional polishing system, Fuse Blast takes your parts to the next level by polishing them to a smooth, semi-gloss finish ready for painting, delivering consistent, professional-grade results every time.
- Self-contained unit.
- A handheld gun for jet finishing parts.
- Finishes parts in a drum.
- Supports manual mode.
Why choose Fuse Blast?
Fuse Blast provides 100% automated hands-free cleaning and polishing of SLS prints.
| Finished parts in 15 minutes
Performs automatic post-processing of the entire oven volume in 15 minutes, while passive filtration reduces abrasive saturation and extends abrasive life, saving on overhead costs. |
Repeatable results
Pre-programmed routines eliminate randomness. You get consistent results every time, while Fuse Blast’s manual mode allows you to adapt to any detail requirements. |
| Professional prints
Get clean-to-the-touch parts thanks to the built-in ionizer, which prevents dust and abrasive from re-settling on your parts. You can also take an extra step and utilize the optional polishing function to achieve a smooth, semi-glossy surface ready for painting. |
Simplified post-processing
Fuse Blast seamlessly integrates into the Fuse ecosystem, automating your post-processing workflow and reducing your work time by 80%. Finished parts in just 15 minutes. |
Features
Fuse Blast is a fast, automated solution that consistently delivers professional results.
- Hands-free post-processing.
- Passive reprocessing for extended media life and faster processing on Sift.
- Pre-programmed procedures.
- Drop-in upgrade Fuse Blast Polishing System.
- Built-in ionizer for clean-to-touch parts.
- Dual function jet with automatic or manual cleaning.
- Fully sealed and workshop-friendly.
Fuse Blast automated sandblasting system
Fuse Blast characteristics
| Printing technology | SLS |
| Hopper capacity (l) | Media hopper capacity: 8.3 liters, equivalent to 13 kg of 200-300 µm thick glass media. Waste hopper capacity: 10.6 liters |
| Supported materials | Powder |
| Compressed air requirements | Feed at least 10 cubic feet per minute at 90 psi / 285 SLPM at 6 bar. Adjust inlet pressure between 90-120 psi / 6-8 bar. Typically achieved with a single 4 hp compressor. |
| Operating noise, dB | Does not exceed 70 dB(A) |
| Air filter | HEPA exchangeable media |
| Accessories included | Carry container, control pedals, anti-static wrist strap, 7mm socket wrench, abrasive jet nozzle (3mm), abrasive jet nozzle (4mm), T-20 screwdriver, floor mat. |
| Control | Interactive touch screen, foot pedals for manual operation |
| Printer compatibility | SLS 3D printers: Formlabs Fuse series, third-party with powder fusion technology |
| Connection | Wi-Fi (2.4 GHz), Ethernet (1000 Mbit), USB 2.0 |
| Input power | 230 VAC, 3 A (no special circuit or vacuum required) |
| Air Handling | Negative pressure hood with replaceable HEPA filter Independent ventilation system |
| Manufacturer Country | USA |
| Warranty period (months) | 12 |
| Net weight (kg) | 164 |
| Minimum access dimensions (mm) | 1450×1500×1750 |
| Net dimensions (mm) | 1000×750×1750 |
| Operating medium temperature range (°C) | 10 – 36 |
Buy Formlabs Fuse Blast from the official distributor in Ukraine
Store 3DDevice is an authorized partner of Formlabs in Ukraine and Moldova. Here you can buy SLS 3D Formlabs printers with official warranty and service from the manufacturer. When you buy Formlabs equipment in 3DDevice you get training, equipment installation and service. Contact us in advice.
Free webinar: New Fuse Blast and software enhancements for SLS Fuse Series 3D printers
Discover the latest Formlabs innovations: software enhancements to the SLS Fuse Series and the new Fuse Blast, an automated solution that allows you to clean and polish SLS parts hands-free in just 15 minutes.
