Formlabs Fuse 1 Generation Print Enclosure Rear Access Panel Gasket

Rear Panel Seal for the Formlabs Fuse 1+ 30W Print Chamber is an original sealing element for the contour of the SLS printer series Fuse 1 chamber. The part is installed around the perimeter of the rear access panel to prevent polymer powder leakage and maintain the calculated airflow in the working space. The element supports the necessary chamber sealing and thermal stability during model construction.

Advantages and Features

• Powder Leak Protection. The tight fit of the gasket keeps the fine material inside the chamber and prevents it from scattering.
• Air Circulation Stabilization. The contour seal maintains the necessary direction and speed of airflow inside the working compartment.
• Precise Compatibility. The structural dimensions and cutouts are strictly made to fit the mounting points and fastenings of the Fuse 1 series rear panel.

Application Areas and When to Replace

The part is used during scheduled maintenance or restorative repairs of Fuse 1 and Fuse 1+ 30W 3D printers. Replacement is carried out in case of natural wear, deformation, the appearance of tears, loss of elasticity, or mechanical damage to the gasket during service work. Installing a new element is necessary to prevent contamination of the internal components of the device with powder dust.

Order the Rear Panel Seal for Formlabs Fuse 1+ 30W

Purchase the original rear panel seal for the Formlabs Fuse 1+ 30W print chamber to maintain the working space's airtightness. Our specialists will help you select the necessary spare part and provide consultation on compatibility.