- Stock: In Stock
- Product code: 00-00000550
- SKU: RP-FS1-230-AHTR-01
230 V Air Heater for Fuse 1 is a Formlabs heating element for the Fuse 1 printer. It is responsible for heating the working chamber and maintaining a stable powder temperature throughout the entire 3D printing cycle. The part is installed in place of the standard unit without additional modification of the housing. Connection is made to the C003 AIR harness using terminal connectors. The ribbed metal radiator effectively transfers heat to the airflow and ensures even heating of the chamber.
Specifications and Properties
- Operating voltage 230 V. Complies with the European power grid standard and is suitable for Fuse 1 printers in the appropriate configuration.
- Dense ribbed heat sink. Metal ribs increase the heat exchange area, which accelerates the heating of the air in the chamber.
- Original Formlabs part. Ensures precise compatibility with the printer housing mounting holes and fasteners.
- Ready power leads. The red and black wires connect to the terminal connectors of the C003 AIR harness regardless of polarity.
- Compact form factor. The unit is mounted on four M3 mounting screws without additional modification of the housing.
Access to the Air Heater in Formlabs Fuse 1
The heater is located inside the printer's insulated block. During service, the protective cover is carefully moved aside to access the heating unit, its mounts, and wires.
Applications
- Scheduled maintenance of Fuse 1: replacement of a worn or faulty air heater to restore the standard powder sintering cycle.
- Resolving chamber heating errors: the component addresses the issue of uneven or insufficient heating of the printer's working volume.
- Service maintenance in workshops: a part for authorized service centers and printer owners who perform repairs themselves according to Formlabs instructions.
Technical Parameters
| Parameter | Value |
|---|---|
| Article | RP-FS1-230-AHTR-01 |
| Operating voltage | 230 V |
| Compatibility | Fuse 1 |
| Number of mounting screws | 4 pcs. |
| Connection type | Terminal connectors of the C003 AIR harness |
Storage Recommendations
- Dust protection: store the heater in its original packaging until installation to avoid insulation particles getting between the ribs.
- Dry room: avoid humid and dusty storage conditions that may cause contact corrosion.
- Careful transportation: keep the part in a horizontal position to avoid deforming the thin radiator ribs.
The 230 V air heater for Fuse 1 is available for purchase at 3DDevice with delivery across Ukraine. Also, check out other original Formlabs spare parts for servicing the Fuse 1 printer.
