- Stock: In Stock
- Product code: 00-00014146
Makera Cyclone Dust Collector – Dust Collector for CNC
Makera Cyclone Dust Collector — a dust removal system for compact CNC machines, milling, and laser engraving. The dust collector is designed to collect chips, dust, and small particles directly inside the CNC machine's working area during the processing of wood, metal, plastic, acrylic, and composite materials. The system combines cyclone separation and multi-level HEPA filtration, which helps to clean the air during material processing and maintain stable suction power with a maximum airflow of up to 900 l/min even during prolonged operation. The dust collector takes up little space, operates quieter than regular vacuum cleaners with a noise level of up to 70 dB, and supports automatic control via G-code. Suitable for home workshops, laboratories, and small productions.
Two-Stage Continuous Dust Collection System
Makera Cyclone Dust Collector uses a two-stage dust removal system: cyclone separation and air filtration. During the operation of CNC machines, large chips settle in the container before reaching the filter, while fine dust passes through the HEPA cleaning system. This design helps to maintain a stable airflow and reduces the load on the filters. The system is designed for prolonged operation without constant container cleaning and without losing suction power.
Advantages of Cyclone Dust Collector over Regular Vacuum Cleaner
| Feature | Makera Cyclone Dust Collector | Regular Household Vacuum Cleaner |
| Main Purpose | Designed for CNC machines, provides stable dust removal during prolonged operation | Suitable for home cleaning and short-term dust collection |
| Suction System | Cyclone separation for prolonged continuous operation | Standard suction system, motor may overheat during long operation |
| Handling Chips | Up to 97% of large chips go into the container before filtration | Chips and dust immediately pass through the filter |
| Air Filtration | Three-stage system: pre-cleaning filter, 99.99% HEPA filter, and activated carbon filter. | Basic filtration without effective fine dust cleaning |
| Handling Fine Dust | Effectively traps dust after milling, material processing, and laser engraving. | Some fine dust may return to the air |
| Noise Level | Noise level up to 70 dB ensures comfortable operation in a workshop, office, or home environment. | Over 85 dB during prolonged operation |
| Container Volume | 6 L for prolonged continuous operation | 2–20 L depending on the model |
| Compatibility | Compact CNC machines, processing of plastic, wood, composite materials, and laser engraving. | Only basic dust and debris cleaning |
| Control | Button, App Control, and automatic start via G-code | Manual control only |
| Motor Power | 200 W with a cooling system for long-term operation | Household motor that quickly overheats during prolonged continuous load |
| Size and Design | Compact body 300 x 218 x 354 mm for convenient placement next to CNC | Large bodies, take up more space in the workshop |
Automatic Control via G-code and Makera Controller
Makera Cyclone Dust Collector supports integration with Makera equipment and allows automating the dust removal system during CNC processing. The dust collector supports:
- manual control;
- control via Makera Controller app;
- automatic start via G-code.
During milling, the system automatically collects dust and chips, maintaining the cleanliness of the working area and material processing.
Through the Makera Controller app, you can:
- adjust the air flow power;
- change the suction power;
- remotely control the system via Wi-Fi.
The dust collector can automatically start at the beginning of processing and turn off after work is completed. This helps to reduce dust accumulation inside the working chamber and allows working without constant manual system control.
Step-by-Step Usage
Makera Cyclone Dust Collector connects to the CNC machine and collects dust and chips during operation. The system supports manual control, start via G-code, and control via the Makera Controller app. Automatic start via G-code is fully supported on Carvera Air. For Makera Carvera, dust collector control is performed manually.
Below is a step-by-step connection and setup of the dust removal system:
- Connect the dust collection hose to the CNC machine.
- Connect the power cable and data transmission cable.
- Turn on the system manually or via Makera Controller.
- Set the desired air flow power depending on the material.
- Start milling or laser engraving.
- After work is completed, clean the container and check the filter condition.
For proper connection and setup of the system, it is recommended to watch the Makera Cyclone Dust Collector video instruction.
Filter Maintenance and System Cleaning
Makera recommends regularly cleaning the filters and checking the condition of the filter cartridge. The cleaning frequency depends on the type of material and the amount of dust during CNC processing. When working with wood, plastic, or composites, the system accumulates more fine particles, so cleaning may be needed more often. Thanks to cyclone separation, large chips do not immediately enter the filter, so the system clogs more slowly compared to regular vacuum cleaners.
Makera Cyclone Dust Collector Package Contents
The Makera Cyclone Dust Collector package includes:
- dust collection hose for connection to the CNC machine;
- sponge pre-cleaning filter;
- data transmission cable;
- power cable;
- user manual.
Technical Specifications of Cyclone Dust Collector
| Feature | Value |
| Power | 200 W |
| Maximum Air Flow | 900 l/min |
| Maximum Vacuum | 12 kPa |
| Noise Level | up to 70 dB |
| Container Volume | 6 L |
| Filtration Type | Cyclone separation + multi-level filtration |
| Filters | Sponge filter, HEPA filter, activated carbon filter |
| HEPA Efficiency | 99.99% |
| Control | Manual control / mobile app / automatic start via G-code |
| Body Material | Aluminum alloy + plastic |
| Dimensions | 300 x 218 x 354 mm |
| Weight | 8 kg |
| Compatibility | Makera Carvera (manual) / Carvera Air (automatic) |
Expert Tips from 3DDevice
For processing wood and plastic, it is recommended to use air flow power at the level of 60–70%. For metal and heavier chips, it is better to set 80–100% power. Do not wait for the container to be completely filled — regular cleaning helps maintain good suction and reduces the load on the filtration system. If the CNC machine is used daily, it is worth periodically checking the HEPA filter and having a spare cartridge for continuous operation.
Need a compact and quiet dust removal system for CNC processing? Order the Makera Cyclone Dust Collector for CNC machines, milling, and laser engraving. The system ensures the cleanliness of the working area and effective dust removal during the milling of wood, plastic, and composite materials.
