PET-G Premium filament Spectrum Filaments 1,75 mm 1,0 kg

1 050 грн.

  • Filament diameter: 1.75 mm
  • Coil weight: 1.0 kg
  • Colors: Deep Black


PET-G Premium plastic for 3D printer – buy in Ukraine

On this page you can buy PET-G plastic for printing on FDM/FFF 3D printers. Buy materials for 3D printing from the Polish manufacturer Spectrum Filaments at affordable prices in the 3DDevice store in Ukraine.

PET-G Premium filament has high transparency and chemical resistance, good mechanical characteristics and excellent printing behavior. Like PLA plastics, it is one of the most popular materials used in 3D printing. A significant advantage of PETG is close to zero shrinkage and low moisture absorption. Parts printed with PET-G maintain stable properties over a long period of use. PET-G Premium filament combines the most positive properties of PLA and ABS plastics for 3D printing.

PET-G Premium is available in Ukraine in Deep Black color, but deliveries of other colors are also possible upon request.


PET-G Premium characteristics

  • High transparency compared to other materials for additive manufacturing.
  • Very good mechanical properties in terms of stiffness, hardness and impact resistance.
  • Heat resistance HDT – 69 °C.
  • Vicat’s softening temperature is 78 °C.
  • Chemical resistance.
  • High dimensional accuracy.
  • Combines the advantages of PLA and ABS.
  • Exceptional adhesion between layers.
  • Odorless printing.

Among other properties that characterize Spectrum PET-G plastic, it should be noted good resistance to creep under conditions of constant load. This is possible due to the connection between the layers of the applied material. This results in significantly lower anisotropy of mechanical properties in manufactured parts and means that mechanical properties vary less in individual production runs compared to other 3D printing thermoplastics.


Application of PET-G Premium

  • Visual and functional prototyping.
  • Suitability test.
  • Conceptual models.
  • Production aids.
  • Production of translucent cases and sections with illumination of various shields and signs.

Elements made using Spectrum’s PET-G Premium transparent colors are characterized by a large proportion of crystalline phase, which makes it possible to obtain an effect close to transparency with a small number of external contours, staged elements. The base material and pigments used in the production of PET-G Premium are approved for food contact.

The mechanical properties combined with the chemical resistance of Spectrum PET-G Premium determine the use of this material for the production of elements with relatively high dimensional accuracy and stability of both shape and mechanical properties. These include gears and sliding bearings that are subjected to static loads in the water environment. In addition, Spectrum PET-G Premium is used for the production of elements in the form of translucent bodies and lighting parts of various types of shields and signs.


PET-G plastic for 3D printing on an FDM 3D printer


The thread weighing 1.0 kg is wound on a transparent spool, which contains information about the type of material, diameter, color and recommended printing temperature. Each coil is vacuum packed with a desiccant. All in original Spectrum Filaments foil card stock.

Coil dimensions

  • Outer diameter: 200 mm.
  • Width: 67 mm.
  • Inner diameter: 52 mm.
  • Weight of empty coil: ± 250 g.


Checking the quality of the thread of 3D plastic

Spectrum Filaments is the only company in Poland and one of the few in the world that has a tool for checking purchased filaments. VERIFY YOUR SPOOL is the most accurate quality control system on the market, ensuring that Spectrum Filaments products meet its strict requirements.

Filament for 3D printers is produced by the free extrusion method, which is one of the most difficult extrusion processing technologies due to the particularly significant influence of the process parameters on the dimensions of the product and the homogenization of the material. During the production process, every 1 mm of Spectrum Filaments is continuously measured on 2 axes with an accuracy of ±0.8 μm, which allows obtaining a high-quality final product. To prove this, the Spectrum Filaments company, as one of the few manufacturers in the world, has introduced the possibility of an online presentation, individually for each coil produced:

  • the course of the diameter along the entire length of the coil;
  • average diameter;
  • ovality;
  • standard deviation.



Plastic diameter (mm)1.75
Print temperature (°C)230 – 255
Diameter Tolerance (mm)+/- 0.05
Density (g/cm3)1.27
Thermal Resistance (°C)Until 69
ColorsArctic White, Bahama Yellow, Bloody Red, Bottle Green, Dark Grey, Deep Black, Glassy, Lime Green, Lion Orange, Navy Blue, Pacific Blue, Pink, Silver Star, Transparent Black, Transparent Blue, Transparent Orange, Transparent Red, Transparent Yellow
Bed heatingNecessary
Table temperature (°C)60 – 80
Closed CameraNot required
Cooling (%)Up to 100
Turnover (%)100 – 105
Print speed (mm/s)40 – 120
Rollback Distance For Direct Extruder (mm)1 – 3
Rollback Distance For Bowden Extruder (mm)4 – 6
Rollback speed (mm/s)25 – 45
Producing countryPoland
Weight of Plastic (kg)1
Gross weight (kg)1.4



Technical Data Sheet, PDF

Safety Data Sheet, PDF


Buy affordable 3D plastic for 3D printing in Ukraine

Additional information

Weight1.4 kg

Deep Black


There are no reviews yet.

Be the first to review “PET-G Premium filament Spectrum Filaments 1,75 mm 1,0 kg”

Your email address will not be published. Required fields are marked *

Post comment

You may also like…