Description
Buy filament for 3D printing PET-G Standard Rosa3D 1kg
On this page you can buy filament for 3D printing Rosa3D PET-G Standard with a diameter of 1.75 mm in a 1 kg spool.
With PET-G filament for 3D printing from Rosa3D, you will get a lightweight printing experience comparable to PLA. The material is designed for users who are engaged in both amateur and professional 3D printing.
Parts made from PET-G Standard are characterized by translucency, high accuracy, good adhesion, odorlessness, and low molding shrinkage.
Prints made from PET-G Standard have strong chemical resistance. They can be sandblasted, drilled, sawed, ground, cut, or painted without damaging their integral structure.
PET-G Standard filament is made from raw materials approved for food contact. However, in the case of products that come into contact with food, the certification is carried out by the manufacturer of the final product.
Advantages of PET-G filament for 3D printing
- Easy to print: high adhesion, low shrinkage.
- Stronger than PLA.
- High chemical resistance.
- Does not emit odors and harmful substances during printing and further use.
- Contact with food is possible.
- High accuracy of 3D printing.
- Good workability of prints.
- Large selection of colors.
Application of PET-G in 3D printing
Prototypes, large-format prints, enclosures, lamps, decorative elements, etc.
Recommended print parameters
- Extrusion temperature: 220 – 250°С
- Table temperature: 60 – 80°C
- Air flow: 0 – 60%
Specifications
| Technical parameters | |
| Diameter | 1.75 mm |
| Tolerance for diameter | +/- 0,05 |
| Ovality tolerance | +/- 0,02 |
| Weight | 1000 g (vacuum packed with desiccant) |
| Printing temperature | 220 – 250 °C |
| Table temperature | 60 – 80 °C |
| Physical parameters | |
| Density | 1.29 g/cm3 |
| Odor | Odorless |
| Thermal deformation temperature | 78°C (ISO 306) |
| Tensile elongation | 6% |
| Tensile strength (tensile) | 20 MPa |
| Tensile strength modulus | 2980 MPa |
| Thermal deformation temperature | 55 °C |
| Izod impact strength with teeth | 4.7 kJ/m2 |
| Softening point Vic | 78 °C |
Download files:
Reviews
There are no reviews yet.