3D printer Bambu Lab P1S Combo

Description

Bambu Lab P1S Combo 3D printer with AMS system

New 3D printer Bambu Lab P1S Combo buy in Ukraine in the 3DDevice store. High-tech 3D printer with automatic filament change system (AMS) allows you to print up to 16 colors simultaneously.

New P1S Combo 3D printer with a print volume of 256*256*256 mm and a closed print chamber also has a built-in activated carbon air filter and an advanced cooling system. The air quality control inside the print chamber allows for high-quality printing with materials that are prone to high thermal shrinkage. In addition, it is now possible to eliminate harmful substances released during printing, such as ABS. The printer is equipped with more powerful cooling of the printed model, has a fan for forced air circulation in the chamber and another on the control panel to cool the control board.

The P1S Combo 3D printer borrowed design solutions from the budget systems P1P and P1S, which, in turn, are based on the flagship Bambu Lab X1 model. Therefore, they also develop accelerations of up to 20 m/s² and print speeds of up to 500 mm/s, using vibration damping and dynamic melt flow control algorithms. The geared extruder with two drive gears has a direct filament feed, the all-metal hotend is heated to 300 °C and can be used for 3D printing with composite materials such as carbon and glass-filled polymers.

AMS automatic filament change system

One module accepts up to four filament coils, but up to four such modules can be connected to the 3D printer to bring the filament selection up to sixteen.

Buy in Ukraine 3D printer Bambu Lab P1S Combo

• It works immediately after unpacking from the box – it takes 15 minutes to set up.
• Prints up to 16 colors with AMS. It comes with an automatic filament changer (AMS) that allows you to print up to 16 plastic colors at once.
• Automatic bed leveling and vibration compensation during printing.
• Perfect first layer
• The Automatic Bed Leveling (ABL) sensor calibrates and levels the bed correctly, ensuring a perfect first layer for every 3D print job.
• Well-tuned and polished hardware and software.
• Direct-drive extruder. Better control over extrusion and filament retraction. Precise and consistent extrusion for smooth and blur-free prints
• Closed housing for printing with high temperature materials.
• Built-in filter for printing filaments that emit harmful gases, such as ABS.
• Prints at speeds up to 500 mm/s. Advanced control algorithm with vibration compensation and pressure advance ensures lightning-fast print speeds without compromising quality
• Acceleration up to 20,000 mm/s². Acceleration from zero to 500 mm/s takes just 0.025 seconds.
• Built-in camera for remote monitoring and time-lapse photography.
• Remote monitoring and control with Bambu Studio and Bambu Handy.

High-tech Bambu Lab P1S Combo price

• All-metal Hotend. A durable material designed to provide long-lasting support for 3D printing filaments, including ABS, carbon fiber, at high temperatures. It provides accurate and smooth extrusion to achieve high-quality prints.
• Recovery from power loss. You don’t have to worry about a power outage, you can continue printing from where it was stopped.
• Fans with speed feedback. The speed feedback sensor monitors the fan speed, ensuring that the fan can always run at the optimum speed.
• Thread end sensor. Eliminates the problem of empty spools during printing. Replace the thread when it is empty and resume.
• Semi-automatic belt tensioning. Belt tension is important to ensure dimensional accuracy. Resonant frequency identification is performed every time to maintain the correct tension.
• Live view and slow motion. The built-in camera makes it easy to monitor printing on the Bambu Studio and Handy, as well as create time-lapse videos.

Specification of Bambu Lab P1S Combo

Buy Bambu Lab P1S 3D printer in Ukraine at the best price